Howell Laboratories, Inc.

Filters

Often useful to remove excessive contaminants.

Showing all 4 results

  • Model 8880 Mk III Oil Removal Filter

    $0.00

    Removes oil from low pressure air. Manual drain valve. Requires no electrical power for operation, and has no moving parts except for the manual drain valve.

    • Filtration to 0.01 ppm oil vapor by weight.
    • To 100 scfm (standard cubic feet per minute) (2832 liters/minute).
  • Model 8880 Mk II Coalescing Filter

    $0.00

    Removes liquid oil from low-pressure air. System pressure to 100 psig (690 kPa). Designed for continuous or intermittent, automatic operation (with manual bypass drain valve).

    • Filtration to 0.1 ppm of liquid oil by weight.
    • To 300 scfm (standard cubic feet per minute) (8495 liters/minute).
  • Model 8880 Mk I Moisture Separator/Filter

    $0.00

    Removes solids and moisture from low-pressure air. The unit has a manual drain valve and meets performance requirements with effluent flows from zero to rated flow without requiring operator attention. Requires no electrical power for operation; has no moving parts except for the automatic condensate discharge device and the manual drain valve.

    • Filtration to 3 micron (max. effluent particle size).
    • To 300 scfm (standard cubic feet per minute) (8495 liters/minute).
  • Model 8550 Mk IV Coalescing Filter

    $0.00

    Removes solids and moisture from low-pressure air. The housing has a manual drain valve. The filter meets performance requirements with effluent flows from zero to rated flow without requiring operator attention. Requires no electrical power for operation; has no moving parts except for the automatic condensate discharge device and the manual drain valve. The filter as follows:

    • Filtration to 0.01 micron effluent particle size.
    • Coalescing efficiency (0.7 micron particles of liquid, aerosol, and water drops) to 95%.
    • To 50 scfm (standard cubic feet per minute) (1416 liters/minute).