Mon-Fri: 8:00AM - 5:00PM (207) 647-3327 Contact

Model 7300 Mk I Condenser-Filter Air Dehydrator

Selected for the DDG 1000 class, the Model 7300 Mk I dehydrator is designed to remove water from low-pressure compressed air systems. The air delivered by this dehydrator is intended for use in control systems such as automatic combustion control, or in any low-pressure air system where it is desirable to eliminate moisture. Generally, the air delivered by this dehydrator is NOT of a quality adequate for use in electronics purging.

  • Air for shipboard control systems.
  • Uses ship’s chilled water to dry the air.
  • Monitoring via Siemens PLC and Profibus DP.

$0.00

SKU: 7300-Mk1

Description

Selected for the DDG 1000 class, the Model 7300 Mk I dehydrator is designed to remove water from low-pressure compressed air systems. The air delivered by this dehydrator is intended for use in control systems such as automatic combustion control, or in any low-pressure air system where it is desirable to eliminate moisture. Generally, the air delivered by this dehydrator is NOT of a quality adequate for use in electronics purging.

  • Air for shipboard control systems.
  • Uses ship’s chilled water to dry the air.
  • Monitoring via Siemens PLC and Profibus DP.

Reviews

There are no reviews yet.

Be the first to review “Model 7300 Mk I Condenser-Filter Air Dehydrator”

Your email address will not be published. Required fields are marked *

Product Specs
Parts List
Downloads

Specifications:

Designed in compliance with American Bureau of Shipping Naval Vessel Rules, 15 July 2004 Edition and to comply with all applicable Navy shock, vibration, E3, and EMI requirements.

Pressure: 125 psig (860 kPa) maximum
Temperature: 125° F (52° C) maximum
Humidity: 125° F (52° C) maximum pressure dew point.
Flow: 0 – 100 scfm (0 – 3 m3/min)
Inlet water specifications: 3 gpm (11.4 l/min) minimum at 45° F (7.2° C) maximum.
Pressure Drop, inlet to outlet: 5 psig (34 kPa) maximum
Moisture content: 50° F (10° C) pressure dew point
Particle filtration: to 1 micron
Coalescing filtration: 0.01 micron
Air oil content: 5 ppm maximum
Power requirements: 115 VAC, 60 Hz, single phase, 1 ampere.
Dimensions: 24 in (61 cm) W x 22-1/4 in (56.5 cm) D x 46-13/32 in (118 cm) H
Weight: 244 lb (111 kg) estimated
Options: Indicating differential pressure transducer, Indicating inlet and outlet water temperature sensors
HLI drawing no.: 7300-G501
Electrical schematic: 7300-G501-7
Technical manual: S9514-F6-MMA-010
SKU: 7300-Mk1 CATEGORY: TAGS: