A self-contained unit designed for continuous, automatic operation. Particulate matter and aerosols removed by a coalescing filter. Then the filtered wet air is passed through a membrane module to remove moisture, resulting in an ISO 8573.1 Class 1, 3, 1 rating.
$0.00
A self-contained unit designed for continuous, automatic operation. Particulate matter and aerosols removed by a coalescing filter. Then the filtered wet air is passed through a membrane module to remove moisture, resulting in an ISO 8573.1 Class 1, 3, 1 rating.
You must be logged in to post a review.
Designed for continuous, automatic operation. Moisture is removed by an array of BEKO DRYPOINT™ membrane modules. Solid contaminants and oil aerosol are removed by mechanical filtration.
Provides clean, dry air for use in shipboard dental operating rooms. Fully automatic and operates with very little maintenance. Includes a coalescing filter (removes 100% of 0.03 micron or larger diameter solids and liquid particles), a membrane dehydrator, and upstream and downstream isolation valves.
Built in accordance with LPD 17 Specification 6259K. Welded in accordance with S9074-AR-GIB-010/278. Fully qualified to MIL-S-901D, High Impact Shock (Grade A), and MIL-STD-167-1, Vibration (Environmental) Shipboard.
| Air Flow (Inlet air conditions): | To 12 scfm (20.4 m3/hr) | |
| Temperature (Inlet air conditions): | 55° to 125° F (13° to 52° C) | |
| Pressure (Inlet air conditions): | 200 to 230 psig (13.6 to 15.6 bar) | |
| Moisture Content (Inlet air conditions): | 28.8° F (-1.8° C) dew point maximum at 200 psig (13.6 bar) | |
| Operating ambient temperature: | 60° to 122° F (Fahrenheit) [15.5° to 50° C (Celsius)] | |
| Air Flow (Outlet air conditions): | 10 scfm (17.0 m3/hr) | |
| Pressure Drop (Outlet air conditions): | 10 psi (0.68 bar) maximum | |
| Moisture Content (Outlet air conditions): | -0.2° F (-17.9° C) pressure dew point maximum at 200 psig (13.6 bar) | |
| Purge flow: | 2.0 scfm (3.4 m3/hr) maximum; 1.0 scfm (1.7 m3/hr) typical | |
| Size: | 32 in (81.3 cm) W by 12 in (30.4 cm) D by 24 in (61 cm) H, including maintenance envelope | |
| Weight: | 115 lb (52.3 kg) (actual) | |
| Design pressure: | 250 psig (17.0 bar) except membrane 232 psig (15.8 bar) | |
| Proof pressure: | 375 psig (25.5 bar) | |
| HLI drawing no.: | 8785-G501 | |
| Electrical schematic: | Not applicable | |
| Technical manual: | TM8785-MI-001 | |
The dehydrator has been selected for the LPD 17 San Antonio class.
Reviews
There are no reviews yet.