Designed for continuous, automatic operation. Moisture is removed by an array of BEKO DRYPOINT™ membrane modules. Solid contaminants and oil aerosol are removed by mechanical filtration.
$0.00
Designed for continuous, automatic operation. Moisture is removed by an array of BEKO DRYPOINT™ membrane modules. Solid contaminants and oil aerosol are removed by mechanical filtration.
You must be logged in to post a review.
A self-contained unit designed for continuous, automatic operation. Particulate matter and aerosols removed by a coalescing filter. Then the filtered wet air is passed through a membrane module to remove moisture, resulting in an ISO 8573.1 Class 1, 3, 1 rating.
Provides clean, dry air; fully automatic and operates with very little maintenance. Includes a coalescing filter (removes 100% of 0.03 micron or larger diameter solids and liquid particles), a membrane dehydrator, and upstream and downstream isolation valves.
| Mark I | Mark IA | Mark II | Mark III | Mark IV | |
|---|---|---|---|---|---|
| Maximum Outlet Capacity (scfm): | 20 | 20 | 30 | 14 | 30 |
| Maximum Purge Flow Rate (scfm): | 18 | 18 | 27 | 10 | 27 |
| Inlet Air – Pressure (psig): | 80-125 | ||||
| Inlet Air – Temperature (°F): | 50 – 122 | ||||
| Inlet Air – Maximum Pressure Dew Point: | 60°F at 90 psig | ||||
| Outlet Air – Pressure (psig): | 70-125 | ||||
| Outlet Air – Maximum Pressure Dew Point: | -40°F at 80 psig | ||||
| Outlet Air – Pressure Drop: | ≤ 10 | ||||
| Electrical Requirements: | 115 VAC, 60 Hz, 1ɸ, 1 A (For Dew Point Monitor Only) | ||||
| Dimensions: | 36″ W x 48″ H x 18″ D | ||||
| Weight (lbs): | 410 | 425 | 450 | 450 | 450 |
Reviews
There are no reviews yet.