A self-contained unit designed for continuous, automatic operation. Particulate matter and aerosols removed by a coalescing filter. Then the filtered wet air is passed through a membrane module to remove moisture, resulting in an ISO 8573.1 Class 1, 3, 1 rating.
$0.00
A self-contained unit designed for continuous, automatic operation. Particulate matter and aerosols removed by a coalescing filter. Then the filtered wet air is passed through a membrane module to remove moisture, resulting in an ISO 8573.1 Class 1, 3, 1 rating.
You must be logged in to post a review.
A self-contained unit designed to remove water, oil, and solid contaminants from shipboard low-pressure compressed air systems. Designed for continuous, automatic operation. Removes moisture by passing the incoming wet air through a membrane module. Aerosols and particulate matter are removed by a coalescing filter and a mechanical filter.
Provides clean, dry air for use in shipboard dental operating rooms. Fully automatic and operates with very little maintenance. Includes a coalescing filter (removes 100% of 0.03 micron or larger diameter solids and liquid particles), a membrane dehydrator, and upstream and downstream isolation valves.
Designed for continuous, automatic operation. Moisture is removed by an array of BEKO DRYPOINT™ membrane modules. Solid contaminants and oil aerosol are removed by mechanical filtration.
Built in accordance with LPD 17 Specification 6259K. Welded in accordance with S9074-AR-GIB-010/278. Fully qualified to MIL-S-901D, High Impact Shock (Grade A), and MIL-STD-167-1, Vibration (Environmental) Shipboard.
| Air Flow (Inlet air conditions): | To 12 scfm (20.4 m3/hr) | |
| Temperature (Inlet air conditions): | 55° to 125° F (13° to 52° C) | |
| Pressure (Inlet air conditions): | 200 to 230 psig (13.6 to 15.6 bar) | |
| Moisture Content (Inlet air conditions): | 28.8° F (-1.8° C) dew point maximum at 200 psig (13.6 bar) | |
| Operating ambient temperature: | 60° to 122° F (Fahrenheit) [15.5° to 50° C (Celsius)] | |
| Air Flow (Outlet air conditions): | 10 scfm (17.0 m3/hr) | |
| Pressure Drop (Outlet air conditions): | 10 psi (0.68 bar) maximum | |
| Moisture Content (Outlet air conditions): | -0.2° F (-17.9° C) pressure dew point maximum at 200 psig (13.6 bar) | |
| Purge flow: | 2.0 scfm (3.4 m3/hr) maximum; 1.0 scfm (1.7 m3/hr) typical | |
| Size: | 32 in (81.3 cm) W by 12 in (30.4 cm) D by 24 in (61 cm) H, including maintenance envelope | |
| Weight: | 115 lb (52.3 kg) (actual) | |
| Design pressure: | 250 psig (17.0 bar) except membrane 232 psig (15.8 bar) | |
| Proof pressure: | 375 psig (25.5 bar) | |
| HLI drawing no.: | 8785-G501 | |
| Electrical schematic: | Not applicable | |
| Technical manual: | TM8785-MI-001 | |
The dehydrator has been selected for the LPD 17 San Antonio class.
Reviews
There are no reviews yet.