Howell Laboratories, Inc.

P. O. Box 389, 188 Harrison Rd., Bridgton Maine 04009 USA

(207) 647-3327	(888) 744-8359	FAX (207) 647-8273	contracts@howelllabs.com

	About Us		Dry Air		Water Treatment		Technical Material		For Vendors

	Our capabilities
	Key personnel
	Directions to Howell Labs
	Employment
	News

	Air dehydrators
	Moisture measurement
	Air control panels
	Part number cross-reference
	Field service

	Potable water
	Anti-fouling systems
	Part number cross-reference
	Field service

	Technical bulletins
	Technical sheets
	Dew point calculator
	Material safety data sheets

Purchase order terms and conditions
Vendor HazMat compliance

- An Employee-Owned Company -
Certified to ISO 9001:2000

Model 7005

Backup Air Dehydrator For Dental Operating Room

Features:

• Complete instrumentation package to monitor operation.
• Low purge loss.
• Purge air consumption does not increase with increasing inlet pressure.
• No electrical power needed.

General Description:

The Model 7005 series air dehydrator has been selected for the LPD 17 San Antonio class. It is designed to provide up to 7 scfm of clean, dry air for use in shipboard dental operating rooms. The unit is fully automatic and operates with very little maintenance.

The Model 7005 includes a coalescing filter (removes 100% of 0.03 micron or larger diameter solids and liquid particles), a membrane dehydrator, and upstream and downstream isolation valves.

Specifications:

• Built in accordance with LPD 17 Specification 6259K. Welded in accordance with S9074-AR-GIB-010/278. Fully qualified to MIL-S-901C, High Impact Shock (Grade B), and MIL-STD-167-1, Vibration (Environmental) Shipboard.
• Outlet Capacity: 0 - 7 scfm.
• Inlet Air Conditions (defined by specification): Pressure 80-125 psig.
  Temperature 50° F to 122° F.
  Maximum dew point of 60° F at 80 psig.
• Outlet Air Conditions: Dew point -40° F or lower at pressure.
  Pressure not more than 10 psig below inlet.
• Electrical Requirements: None.
• Dimensions: 16" W x 48" H x 12" D.
• Weight: 77 pounds.
• APL: To be determined.
• Technical Manual: Mark I: SH950-B3-MMC-010.
• QA System: ISO-9001 - 1994

---

Last updated: 04/18/2008 Webmaster: Al Friend © 1996-2008 Howell Laboratories, Inc. All rights reserved.		Printable Adobe Acrobat version
		Get Acrobat Reader (free download)