Howell Laboratories, Inc.

P. O. Box 389, 188 Harrison Rd., Bridgton Maine 04009 USA

(207) 647-3327	(888) 744-8359	FAX (207) 647-8273	contracts@howelllabs.com

	About Us		Dry Air		Water Treatment		Technical Material		For Vendors

	Our capabilities
	Key personnel
	Directions to Howell Labs
	Employment
	News

	Air dehydrators
	Moisture measurement
	Air control panels
	Part number cross-reference
	Field service

	Potable water
	Anti-fouling systems
	Part number cross-reference
	Field service

	Technical bulletins
	Technical sheets
	Dew point calculator
	Material safety data sheets

Purchase order terms and conditions
Vendor HazMat compliance

- An Employee-Owned Company -
Certified to ISO 9001:2000

Model 6651-2C110

Recirculating Bromination System

Features:

• Unique cartridge housing will never corrode.
• Cartridge housing mounts on left or right side of frame.
• Remote operation and tank selection.
• Uses NSN 4610-01-022-9970 replacement cartridges.
• MIL-STD-167 vibration and MIL-S-901 shock qualified.
• All-bronze pump with IEEE-45 motor.
• Comprehensive technical manual included.
• Manual DPD (diethyl-p-phenylene diamene) colorimeter test kit included.

General Description:

The Model 6651-2C110 Brominating System was designed to recirculate and treat the water in the ship’s two potable water storage tanks.

The brominating system consists of a rugged, below-deck, bulkhead-mounted, brominator/pump assembly and a remote bulkhead-mounted control panel. The unique cartridge housing is manufactured from a high-strength plastic that will never corrode. The all bronze pump and corrosion resistant fittings used throughout are designed for reliable service and long life.

Alignment for storage tank recirculation is achieved by solenoid valves activated by a switch on the remote control panel. The control panel includes the pump start/stop station, tank selector switch, and a lamp indicating when the unit is brominating.

When treating water, a portion of the pumped flow is diverted through a cartridge containing bromine-impregnated resin. The bromine elutes into the water stream. This water stream is then re-introduced to the main flow, disinfecting the potable water with its biocidal action. A time totalizer keeps track of cartridge usage and lights a lamp when the cartridge needs to be changed.

Specifications:

• Fully compliant with MIL-S-901D high impact shock (grade B) and MIL-STD-167-1 (Environmental) vibration requirements. The pump, motor, and electrical panel meet IEEE-45 standards for shipboard electrical service./li>
• Capacity: Two tanks of 50 - 12,000 gallons each.*
• Dimensions: Brominator: 30" W, 27" H, 17" D
  Control Panel: 22" W, 22" H, 9" D.
• Weight: Brominator: 195 lb.
  Control Panel: 50 lb.
• Piping Interfaces: 1" MIL-F-1183 union fittings standard; other fittings available.
• Electrical: 440 VAC, 60 Hz, 3-phase, 10 amps.
• Water Temperature: 32° F to 120° F.
• Operating Pressure: 30 psig.

Available Options (please contact factory):

• Automatic bromine level control system.
• Remote alarm signal for cartridge replacement.
• 115/230-VAC power supply.
• Variable number of tanks.
• Electronic DPD colorimeter test kit.
• Additional cartridge housing for increased capacity.*

*Actual capacity is dependent on many variables; please contact factory with your requirements.

---

Last updated: 03/18/2008 Webmaster: Al Friend © 1996-2008 Howell Laboratories, Inc. All rights reserved.		Printable Adobe Acrobat version
		Get Acrobat Reader (free download)